• Home
  • About
  • Contact Me

Jennica Mold Design

Genesis Framework for WordPress
  • Injection Mold Design
    • Services
      • Data Conversion
      • Piece Part Modeling
    • Portfolio
  • KeyCreator™ CAD
    • Free KXL Downloads
    • KXL Dialog Box Creator
  • KeyCreator™ CDE Programs
    • Level Tools
  • Blog

Miter Solids Program

April 8, 2014 By Hans Winkler 1 Comment

The Miter Solids Program is a CDE add-on option to KeyCreator™ CAD software. This program allows you to trim/extend rectangular and/or cylindrical solids and miter them at their intersections with a few clicks. No more establishing construction planes before trimming. Simply select the geometry and it will be done for you.
This program has been in the works for some time, but finally it is here.
Check it out right here

Filed Under: Blog

Released the KXL package for KeyCreator™ 12.x

March 15, 2014 By Hans Winkler 1 Comment

Hi everyone,
The KXL package for KeyCreator™ 12.x.

Feel free to download the file right here!

I added a new KXL to create External threads via entering variables into a dialog box. The solid will have a true helical form according to the variables entered. The variables will be remembered the next time the program is used.

Check it out!

Filed Under: Blog Tagged With: KXL programs | Keycreator™ | Kubotek

New KXL package for Kubotek’s KeyCreator™ 9.x released

November 10, 2009 By Hans Winkler Leave a Comment

Hi everyone,
I just uploaded the KXL package for KeyCreator™ 9.x.

Feel free to download the file right here!

This package is still offered at $24.90 Dollars. Since there are seven programs in the package, that comes to $3.55 Dollars per program, not a bad deal!

Let me know what you think, I always love to hear from the users of my KXL programs.

Filed Under: Blog

New KXL package for KC 8.5 released

November 5, 2009 By Hans Winkler Leave a Comment

Hi all,
finally I got around to release a new KXL package for KC 8.5.x found right here!

My newest project for this release is the ExportCKDfiles.kxc program. This program allows the multiple selection of multiple CKD files and then exports the selected CKD files to any file type selected as shown in this picture Export File Types

Another option is for certain file types to loop through all layouts in a file and export the layouts as well. Wow, what a time saver! Best of all is it part of an entire package of programs and they are available very reasonable.

Filed Under: Blog

Free & trial KXL programs added :)

February 26, 2009 By Hans Winkler Leave a Comment

Hi all,

I just added two new programs to the free KXL program download page, they are:

GetAndSaveDisplayView.kxc which is a program that saves the display view by entering a saved view number or press F1 to save the current view. Then you are able to open another Keycreator™ CKD file and restore the saved view by pressing F2 from the program menu.

LevOnOff.kxc is a program that quickly allows the turning on and off of levels via the selection of a entity (or multiple entities). Whenever the program is executed the second time the level list is restored to what it was when the program was executed the first time. The down loadable file is a zip file containing multiple files. Please read the LevOnOffReadme.pdf file before using this program to get a basic understanding on how the program works.


Then last but not least I added my newest program called CircularSlots. This program has also been added to the Package deal.

You may find out more information right here: download page

Well, if any of you need some custom KXL programming done or have some questions about the KXL language, feel free to contact me.

Filed Under: Blog

KXL programs packaged

February 17, 2009 By Hans Winkler Leave a Comment

I had planned it for quite some time and finally it’s available.

You say what?

Well, you may now download all KXL programs in one package at a 30% cost reduction. All programs will run on a single license file, so there is no need to register all individual programs.

Also, for anyone that buys the package early, they have the chance to get the next KXL program(s) for free, when and if I expand the package.

Check it out right here The Package Deal!

Filed Under: Blog

KXL Dialog Box Creator

February 3, 2009 By Hans Winkler Leave a Comment

Finally I had a chance to bring the KXL Dialog Box Creator back for sale over the Internet. As I was going over the code again and made some adjustments to it, I realized that it has been over three years already since I first started to write this program.

It has been a great blessing to me and also to others out there that have bought it. My main goal was to cut down the time it took to create dialog box KXL code, since coding without this software is like riding a bike blind folded. You will still get to the destination, but it just takes so much longer.

Since my main job is to design plastic injection molds, I don’t have the time I would like to have to further programs I have written. It’s not that they don’t get finished, it’s just taking longer than I’d like it to.

Anyway, feel free to download the KXL Dialog Box Creator and give it a whirl. It sure revolutionized my dialog KXL programming.

Regards, Hans

Filed Under: Blog Tagged With: keycreator™, Kubotek, kxl dialog box code

Create Sphere from 4 points

February 2, 2009 By Hans Winkler Leave a Comment

I just added a KXL program that creates a solid sphere and it’s center point tangent to four selected points. Simply select 4 points in Keycreator™ and providing they are not on the same plane, a solid sphere and a center point of the sphere are created.
You may download the program right here.

KXL programming is fun.

Filed Under: Blog Tagged With: keycreator™, Kubotek, kxl programming, sphere

Keycreator™ KXL Programs

January 27, 2009 By Hans Winkler Leave a Comment

Hi to all,

I finally made my first big strides on my new website to offer some of the KXL programs I have written over the years. I know that everyone likes to see free software that is useful, so I added a page that only deals with KXL’s that are free. They are however compiled and have therefore a KXE extension. I will try to add some new files in that directory every now and then as time allows.

I do however also offer KXL programs that are working on a trial basis, and may be purchased. These KXL files can be of great benefit and are always a huge time saver for the jobs they do. They are compiled and have therefore either a KXC or a KXE extension.

You’ll find them under Keycreator™ – KXL Programs V8 as subcategories. As new versions of Keycreator™ are released, I’ll add the newly compiled files under the appropriate directory.

Feel free to blog away!

Hans

Filed Under: Blog Tagged With: kxc programs, kxe programs, kxl programs

Single Cavity Pitcher Mold

December 18, 2008 By Hans Winkler Leave a Comment

Single cavity hot runner mold for pitcherHot sprue fills the part

Filed Under: Featured Tagged With: hot runner injection mold, hot runner mold, hot sprue mold

  • 1
  • 2
  • Next Page »

eNews & Updates

Sign up to receive news and software updates as they are released!

GET CONNECTED

  • LinkedIn

Recent Posts

  • Miter Solids Program
  • Released the KXL package for KeyCreator™ 12.x
  • New KXL package for Kubotek’s KeyCreator™ 9.x released
  • New KXL package for KC 8.5 released
  • Free & trial KXL programs added :)

Friends of JMD

  • Best Plumber
  • CAD reselling and translation service
  • ForwardMotion Designs
  • Hentschel Precision Machining
  • JR McClellan Guitars
  • KeyCreator oversees
  • Organ builder

Archives

  • April 2014
  • March 2014
  • November 2009
  • February 2009
  • January 2009
  • December 2008
  • November 2008

Copyright © 2025 • Jennica Mold Design • Designed by ForwardMotion Designs